You are using an outdated browser. Please upgrade your browser to improve your experience.

print article Print article

Bricks for Residential Construction

The brick's relatively high compressive strength class 12 and permissible compressive stress of 1.9 MN/m² are achieved through the reinforcing arrangement of the webs. Another reason for the high load-bearing capacity of the outer masonry is the way in which the brick, which is ground level at the factory, is laid in thin-bed mortar with a capped horizontal joint. In addition, the interlocking of the brick endfaces ensures butt-jointing in the joint area. The fact that the butt joints are not mortared also cont-ributes to particularly pressure- and tensile-resistant masonry.
For structural reasons, reinforced concrete walls were used for individual facade areas. With its mineral insulation filling, the Unipor WS10 Coriso achieves a thermal conductivity of 0.10 W/mK. Leipfinger-Bader also supplied levelling bricks, prefabrica-ted brick lintels and brick roller-shutter boxes.

www.leipfinger-bader.de

 

Kurze Werbepause

Leipfinger-Bader, bricks, brickwork, dwelling house, Landshut, Germany

Photo: Oberhauser GmbH

This article is taken out of the following magazine:
DETAIL 6/2019
DETAIL 6/2019, Brickwork and Stone

Brickwork and Stone

See magazine
Product teaser
Advertisement

ARCHITECTURE & DESIGN

Detail Newsletter

We will keep you informed about international projects, news on architectural and design topics, research and current events in our newsletter.